Newline 28mm Assyrians - the test batch

Lacking a 28mm Biblical army, I've been dithering about picking up an Assyrian army for some time now, on the basis that it is a decent list which I've used in 15mm with some degree of success, and more importantly that it's small, so hopefully not too expensive.

With multiple hoverings over the Foundry website failing to convince me I wanted the army enough to spend Foundry prices (£22 for a chariot! Ouch!), whilst browsing the traders at at the recent Attack! show in Devizes I stumbled across Newline Designs, who I'd mostly associated with 20mm ranges in the past but who also have a substantial range of 25/8mm figures as well.

They had a great value Assyrian Army pack (2 chariots, 9 Cavalry, 80-odd foot for about £75 from memory), with a special show offer of 20% off as well on the pack and any extras.. so a sub-£100 Assyrian Army was immediately bought!

So far I've only painted up a few figures just to see how they come out (the whole army will be a more production-line project), and I've also taken the "same army, different scales" principle to it's logical extreme by painting them up exactly the same as my 15mm Assyrians !

And here they are, next to the Museum 15mm Assyrians, and also some Foundry Commanders that I use in my 15mm army.

They are still a WiP project - I've not even done a full MF base of 6 infantry

The Newline figures come with figure-metal spears which I plan to replace with wire ones - like this guy. The sword is also from the bits box - all the Newline guys come with spears.

Here they are with the Museum 15mm figures

Same shield patterns - not too difficult to be honest...

The Armoured Slingers are over-supplied for ADLG armies in the Newline army pack, but the handful of spares will fill in as back rank figures in bigger units of Line Infantry

A generous three poses of bowmen - here's two of them.

This is the Newline chaps next to some Foundry Officers - a great match on size and body mass as well. The Newline guys look a bit shorter here, but their bases are lacking in magnabase so they are a little shorter due to that reason, not figure height.

Here are the Newline slingers and some more Foundry officers with equal height basing. A near perfect match - apart from on price!

Once the spears arrive I'll get cracking on the Assyrian production line - even these 28mm Chariots will end up with scaled-up versions of the same "wallpaper" I used on the earlier, smaller 15mm versions.

The Fire Golem!

A bit of variety now, with one of Malifaux's biggest models, The Fire Golem.

This one is from the M2e Backdraft box set, which means I'm short of a couple of apparently so-so extra minions but I do instead have Saboteurs and Fitzsimmons as well (which are all in the painting queue as we speak).

He wasn't the easiest model to paint as the flames go in all directions, meaning there isn't a clear orientation to allow you to start with pale white-ish flames and then shade it through to red and even sooty black

As a result I wasn't really happy with him until I did several more layers and more drybrush-style highlights than I might normally do on a flaming model.

The basic technique was to start with a series of very pale and thin yellow washes using watered down paint, and then start adding highlights in progressively darker oranges and even reds until I was happy with the overall look.

Managing to pick out all of the bits of brazier holding him together was also not the easiest as the metalwork does rather blend into the mass of flames in a way which makes black-edging it tricky.

In the end I ended up with a bit of drybrushing of gunmetal and pale grey onto the brazier elements, and then blacklining them where I could to finish it off. Here is the guy with Kaeris' totem the Eternal Flame.

This is from a dayglow orange Kaeris box that I won in a draw at a competition a couple of years ago. I had a metal Kaeris and so hadn't painted this guy as I wasn't really sure how he would work in M2e - but he's more useful (and free!) now so time to get him done.

All of the orange bits are the original plastic left unpainted

The rest is gunmetal and Peat Brown ink over a black undercoat, apart from the gears on his leg joints which were a pale sandy colour which I know responds really well to Peat Brown ink

I did also pin him underneath as I really wasn't convinced that glueing his very small feet to the base would be secure enough to hold him in gameplay.

The Golem is HUGE - he he is next to fellow firestarter Bansuva.

28mm Landsnechts & Swiss - in GW Contrast Paints!

You know those painting projects that seem never to die? They just drag on and on, staring at you and each time you start trying to move them along the sheer quantity of painting ends up crushing your will to continue?

Well, for me that was a big winged-Keil of Landsnechts in 28mm, bought for FoGR in a series of bring and buy used-figure bags - and then supplemented by a pack of Old Glory arquebusiers.

I had even made a couple of half-hearted attempts to sell them as a part-painted project - but then suddenly realised that they were the perfect project to try the new GW contrast paints (as even a so-so painted unit is better than a unit that never gets painted or put on table, right?

See the full effect in this photo-article..

Ninja Time!

Whist my 15mm Samurai army is already too extensive to really use in one go, that doesn't stop a steady drip-drip of additional units and, well, cool toys being added to it from time to time.

The latest incremental unnecessary items are a Japanese folklore-inspired replacement Stampeding Herd ("Expendables" in ADLG terms), and some good-at-hiding Ninja ambush markers as well.

These all come from Philp Mann's recent Kickstarter project, and were obtained by "ADLG-R" guru "Aussie Simon" on my behalf.

Oni are basically Japanese Troll/Demon things, with a long tradition of being generally unsubtle and violent - and most usually bright red as well ! As such a herd of Oni seemed a great way to represent a more mythic retelling of the use of a stampeding cattle herd in the Battle of Kurikara

The Oni's flesh is all painted with the new Citadel Contrast Paints - Blood Angels Red, Akhelian Green (the blue coloured one oddly enough) and Creed Cammo for the Green ones. There's more Contrast Paint malarkey coming soon ...

Oni typically carry these types of iron clubs called kanabō. In Japan the expression "oni with an iron club" means to be invincible or undefeatable - not something my cattle herds have really achieved all that often it must be said!

The ninja figures are really nice, with a lot of variety but are a smidge large to use alongside or mix in with my Old Glory Samurai -  but being ninjas, they are good at hiding and sneaking around so I have press-ganged some into service as ambush markers. 

 I've colour-coded the three 40x40 markers using the flower grass tufts - each base also has the ninjas with a small bit of the same colour on their inner-garment sleeves

The Red markers above, and below the green ones

Here are the sets of figures next to the Old Glory Samurai for scale comparison.

As you can see, the Ninjas are not too far off, but just a bit too far for using together with the Old Glory figures for my taste.

A fistful of 15mm Swiss

With a one-day Late medieval themed competition looming, it seemed a good time to upgrade my handful of Mirliton Swiss pikemen into a L'Art de la Guerre Swiss army capable of taking to the table.

With the Mirliton ranges no no longer being available in the UK, I decided to try a different manufacturer to round out the 5 pike blocks I owned already. After a bit of browsing I settled on the perhaps unlikely choice of QRF/Freikorps, on the basis that they looked to be a similar heft and body shape to the Mirliton figures, and also as they too had open hands for separate weapons.

The QRF figures are a smidge more frail, and are less "frilly sleeved" than the "a bit frilly" Mirliton figures, but with a good selection of flags downloaded from Alex Flags, compatible basing and similar paint schemes they look pretty decent at tabletop distances to me.

These are 40x40 bases with 12 figures in 3 ranks - an  ADLG Kiel

I chose to blackline these figures - not a style I usually adopt, but with the blocks of adjacent colour on the Swiss and my reluctance to ink-wash a set of figures with so much white on them it helps to make the limited palette of contrasting colours pop a little more 

It can of course end up looking like Mondrian was their official uniform designer.

The bases are painted in a Homebase testor pot - nice and cheap !

The Mondrian effect is very visible from the back

As I've probably posted before, making sure to paint the edges of the flags to remove that unsightly white paper line along their edges is really important and makes a huge difference to the overall look and feel. If you don't do this your eye is automatically drawn to the (white) edges of the flags, breaking the illusion of the figures.

Here are some of the QRF/Freikorps guys next to the Mirliton figures (LKM on the right)

I also based up some halberdier units - these are pretty flimsy and I can see some casualties in the halberd-blade department as soon as they take to the table in battle conditions

Another view of the two types - Mirliton on the left, QRF on the right.

 Halberdiers again.  Not that great close up, but these are painted for tabletop distance viewing.

 Mirliton in the foreground, QRF from Berne behind them