The hoplites are now ready for battle!
With sand and woodstain basing and a bit of static grass they are now basing-compatible with my Biblical armies, which gives them a handful of opportunities in some of the more obscure later ADLG lists to appear alongside Egyptians and (occasionally) Asssyrian-style chariots.
There is a mix of armoured, linen cuirass, skirt and nude figures, but I just mixed them all up together for variety.
This view more clearly shows the different armour (or not!) styles
The transfers are great, but still do leave a big lip around the edge of the shield which for some of the designs (with detail right up to the edge of the transfer) is rather tricky to blend in with matching paint out to the shield rim.
The base on the right shows this - the guy at the front ended up with a contrasting shield rim, whereas the guy behind I just about managed to blend in the rim with a similar red to the transfer itself.
The "white" shields are a bit easier, and I went with a simple bronze rim for most of them anyway
As well as packs of mixed poses, there are separate packs of just the standing guys - my view is that you probably need a number of these standing pose packs to make up the bulk of the rear ranks in your army or units, otherwise if you just go fo rmixed packs you could end up with a few too many kneeling and, erm, lurching men in the front rank
I kept the crests all black - there's probably more than enough colour in the shields and their rims already and I didn't fancy drifting itno rainbow territory onn the crests too
Yes, with a smidge more painting and a decision on basing driven largely by the UK government's decision to close all DIY shops and impose a total lockdown on all non-essential travel (thus denying me the opportunity to buy some wood filler) the Museum Z-crew are now ready to take the table.
Or, more likely, they are now ready to stay in a drawer until playing soldiers again is no longer something that would contribute in any way to the potential collapse of the NHS.
The figures - and especially their shields - as pretty big, probably at the 16-17mm end of the scale without quite reaching "giant Xyston ranges" levels. That allows a 40x30 base to be pretty well filled with 7 figures (4+3), so I eked out 5 bases-worth from 4 packs, adding in this ex-Warmodelling brand mounted officer picked up at the PAW show in January to one of the bases to represent a unit with an embedded general.
There is a mix of armoured, linen cuirass, skirt and nude figures, but I just mixed them all up together for variety.
This view more clearly shows the different armour (or not!) styles
The transfers are great, but still do leave a big lip around the edge of the shield which for some of the designs (with detail right up to the edge of the transfer) is rather tricky to blend in with matching paint out to the shield rim.
The base on the right shows this - the guy at the front ended up with a contrasting shield rim, whereas the guy behind I just about managed to blend in the rim with a similar red to the transfer itself.
The "white" shields are a bit easier, and I went with a simple bronze rim for most of them anyway
As well as packs of mixed poses, there are separate packs of just the standing guys - my view is that you probably need a number of these standing pose packs to make up the bulk of the rear ranks in your army or units, otherwise if you just go fo rmixed packs you could end up with a few too many kneeling and, erm, lurching men in the front rank
I kept the crests all black - there's probably more than enough colour in the shields and their rims already and I didn't fancy drifting itno rainbow territory onn the crests too
Ta-dah!
2 comments:
Lovely looking hopolites! Destined for a drawer near you, we are all painting for storage at the moment!
Best Iain
Most beautiful hoplites, congrats!
Post a Comment