3D printed Knights

 My adventures in 3D printing continue to slowly gather pace, although not by any stretch of the imagination at a pace which will see me take up 3D printing as a hobby anytime soon!

No, instead of that I've just gone onto eBay and bought some 3D printed "15mm" Knights designed by Eskice Miniatures and sold on eBay UK by Hoplite Miniatures. 

I did sort of want some of these Knights (full armour, no horse barding) but the purchase was as much to see what 3D printing could deliver today, a year after buying some very definately "scaled up 10mm" dollies for an Etruscan army. And, also, these were very cheap indeed at just £12+ P&P  for 24 cavalry figures.  

These are the figures that arrived in the post shortly afterwards - the pictures are taken on a half-inch grid (that's not because I'm an old Imperial-measurementalist, its just that the metric side of this double-sides cutting board is by now totally f---ed).  

They are big chunky models, and are (as scaled by Hoplite Miniatures) pretty big for "15mm", being a chunky 18mm if you are generous, or a fat 19mm if you are not so inclined. 

There were 7 different knights in a few different poses, and as you can see they are pretty clean with only a few little nubs of support still left on that I was easily able to snip off with sprue cutters. 

The horses though were very well-fed wolf-ish, and at this stage I was a little concerned that they might not really cut it, both in terms of style and scale against other 15mm metal and plastic figures I already have. 

But, painted up I think they have come out surprisingly well given that rather lumpy looking start.

 

With paint, shading and washes the horses have largely (but not entirely..) lost that "giant racing lemming" look, with the detail really picking up the Army Painter wash (and in some cases GW Contrast Paint main colour) quite well.  

I deliberately did the shields in simple geometric designs to keep them in the style of the Corvus Belli 100YW knights I painted earlier this year,  ducking the opportunity to add papper printed designs to them. Some of the shields (the round ones) wouldn't take a sticker anyway, but I do wonder if more detailed shields wouldlift these guys even more? 

The lances are surprisingly flexible, with quite a lot of "give" in them, making these much more robust  for such narrow bits of printing than some of the other printed resins I've seen, so from that I suspect materials technology is moving on apace in the 3D printing world.

Having said all that, I did manage to snap two of the lances off when I was taking these photos having done no damage to any of them at all in the preceeding painting and basing stages - they did however glue back on pretty easily with superglue, as the breaks were very clean. 

I only did barber pole stripes on a few of them, not wanting the units to look like a fairground ride with too many striped poles. 

The running horses are actually too long (when printed at this scale) to fit on a 30mm deep base, but I did manage to find some 35mm deep bases I had lying around and they managed to fit pretty well on those. 

So, all in all these are very nice, while also not really being all that close to the standards of good 15mm metal-cast figures from established sculptors. they are however leaps and bounds better than the "Playmobil" figures I bought last year, and are more than perfectly servicable for one-table usage.

The oversized impression from the raw prints seemed to be greatly mitigated by a count of paint and standardized basing - and I imagine that it would in any case be perfectly possible to print them slightly smaller just by changing some settings on the machine anyway.

So, the 3D future is almost here - not quite, but certainly getting closer every day. It will just take a few more folks to pick up their mouse (?) and noodle away at designing figure ranges, presumably just like whoever is designing stuff under the Eskice brand banner and suddenly there will be enough interest and enough competition for design to reach that next level - and if (OK, "when") that is matched with advances in materials tech too it'll not be too long until the choice between printed and cast ranges is a very difficult one to call indeed. 

I plan to take some size comparison photos and post them up in the next few days as well.

(Here's an affiliate link to Hoplite MIniatures eBay store: https://ebay.us/NbWnTW)

. 

Corvus Belli 15mm Knights

 As well as the Pavise infantry that I posted a few days ago, the main reason for buying the PSC Corvus Belli stuff was to get a new refreshed set of knights for the 100YW period, as my existing set of knights were starting to look rather tired and jaded. 

I'd also seen some of what I think were Corvus Belli castings in Chris Tofalos' army at the Northern League event in Manchester at the end of last year, and really liked the bold and simple painting style, so wanted to see if I could emulate it.

The really weird thing was being able to paint the figures "on the sprue" - not something I'd really done in years, and of course not with 15mm Ancients. The sprue seemed to be cast and connected in "invisible" places on the figure, so that was a good start.

And here they are assembled and based, waiting final touching up (after I spotted the details I'd missed in this photo!)

And here are the finished figures - I've gone for bold, generally single colour quarters for the horse barding, and (slightly counter-intuitively) have chosen not to co-ordinate the shield patterns with the barding. Sharp-eyed viewers will also note the reins are sometimes in colours that clash with the rest of the barding.

Many of the riders and horses are sort of tied together colour-wise, but by mixing it up a bit it I was able to introduce a bit more variety and colour into the unit - sometimes a same-colour shield, barding and tabard combination can look a bit of a wall of a single colour, especially on such small scale figures as these.

 

A couple of the lances were a bit bendy, but I didn't bother with the "straighten them in hot water" thing as frankly any metal lance will bend a bit anyway and none of these were too far off the mark to make trying something as faffy-abouty as straighteneing them in hot water worth even  trying IMO. 

I did use a couple of waterslide transfers I had kicking around in the spares box on some of them - but only on panels that are visible when the unit is together. The horse at the rear here doesn't have a corresponding transfer on its front right panel for example.

They have - as with the spearmen - come out identical to metal figures, with the only takeaway from putting these figures together being that in retrospect I wish I'd based them all a little closer together on each base, such that I could then have glued the three adjacent knight models together into a solid mutually supporting block. 

This is because they do bend and flex quite unnervingly when you pick them up, especially the horses that are only attached to the base by one or two hooves, so I have a slight concern that this may lead to paint flaking or possibly some of the legs breaking off over time. 

That may be unfounded worry on my part, but if all three Knights on each base were glued together it would make it more of a solid lump to pick up and use on the tabletop without any detrimental visual effect as they are pretty closely packed already. 

So, I now have 7 bases of brightly coloured knights looking for a chance to hit the table!

Fireforge Feudal Knights

I've been gradually building out a Feudal Spanish/Taifa army from the basis of my existing 28mm Arabs, a handful of Norman-style spearmen and some bring and buy metal knights, but what's been missing has been some "not all fully caparisoned" knights to distinguish the Elite from the Ordinary.

So, when shopping at SELWG, a box set of the Fireforge Templar Knights ended up being the solution, and here they (already) are:

I recycled some very old Space Marine waterslide transfers for these, as my painting isn't neat enough to do sharp-edged crosses

The guy (or as they are a kit, the arm) with the flail is pretty cool. The sprues come with more than one of these so my next Almughavar base may end up with a guy armed with this too!

More upcycled Space Marine graphics - I very roughly painted in some extra texture into the white-only transfers of the Pegasus and the stag's head to give them a bit more depth.

This guy doesn't have a weird helmet - its the mace of the guy in the middle (who also has a GB Arab head to make these feel a bit more El Cid "Spanish Reconquista" era) 

The painting-in is more visible here on the barding

Every time I do it I regret starting a check pattern, but this one is not too bad IMO

A jolly nice set which have painted up quickly and effectively! 

Random bits and pieces

 With 2 full armies in the paint queue, I finally got around to tidying up some of the odds and sods that had been cluttering my paint table for, well, in some cases, many years!

The ends results are eclectic, and not all done in Contrast Paints either (to make a nice change!) 

First up, some dynamic falling knights from Donnington's 100YW range, based up as exuberant hit markers 

Next, and the main batch, some 28mm metal knight figures of unknown (ie unpainted on a Bring & Buy) origin.  

I've used waterslide transfer paper and my home printer to make the symbols for the heraldry so that's why they look so precise - my painting hasn't suddenly improved !

Irritatingly a bit of ink wash seems to have congealed on this guy's shield.

They are done up as Spanish Knights, with Castile and Leon heraldry 

And a few other cities and statelets too

I really like these figures - they came with separate hands to mix and match weaponry

One unit is in non-Spanish colours

I've had this guy hanging around for ages, but drilled out his hand and added a Valencian flag 

More weirdly, these are some sort of random armoured horsemen on what I am pretty sure are old Essex Han Chinese chariot horses, painted up as African Kingdoms mounted warriors or cataphracts

The padding really helps create a bright and unusual looking unit. 

I did also add some cotton as  horse-hair style pennants to differentiate the Elite from the Average ones. 

More random stuff to come soon!

Medieval Apocalypse - in 10mm !

 Listeners to the Podcast may have heard me mention some 10mm Barons wars-type medieval 10mm miniatures a few times, as Ryan from Apocalypse Mini's was kind enough to send me a few samples. 

I've not really got a plan to build a 10mm army, so they have languished a little in the lead pile, but finally I came up with a plan to potentially use them as game counters for some very lightweight Medieval board games which came as part of a Battlegames book about "Knights at War" which I've owned since I was a kid - it probably helped propel me into actual wargaming if I'm honest, so whilst the games are pretty flimsy I have a lot of affection for them even now.

There's a mix of foot spearmen, mounted knights and retainers, all of which I've done in basic Contrast paints and then based up on 15mm rounds - ideal to act as 3D game counters

Not bad at all!     Now... I wonder what other games I can use them for... maybe I need to buy Kingmaker, and then a few more of these figures... aaarrgh!!