Making 28mm Victrix elephants multi-national

 As heralded last week, I used some magnets to allow the two Victrix elephants in their kit to be used with interchangeable crew and accoutrements (OK, shields clipped to the sides of the howdahs), giving me Successor, Numidian and Roman elephants, just not all at the same time..

This is the full set of clip-on shields and glued-together crew for the two elephants.

You can (just about) see how rare earth magnets have been glued in place between the feet of the guys, so they can connect to a small patch of steel paper that I have glued down inside the base of each howdah to hold the crew in place firmly enough for gaming use.

Here's the "Red & Green" elephant with Successor shields and crew attached - you can see this as a Numidian elephant in an earlier blog post.

I spent quite some time carefully doing the crew as they are the most visual and visible part of the model. 

The elephant is quite a nice model and looks realistically proportioned and animated.

I copied the "bit in the middle" of the pike from the style I did for my Victrix pikemen - but for this figure that bit was included in the casting (moulding?) whereas for the pikemen I had to add it with rolled up paper!

The shield is attached with 2 magnets, as is the spear case at the back. I glued the magnets on the outside of the howdah for the shields, and then realised that they were strong enough to magnetize to another magnet through the walls of the howdah, so the spear case only has 1 maget outside and one on the inside wall of the howdah.

The "blue" elephant with blue crew. 

The shield pattern was a transfer which I blended in with mixed paint to reach the rim of the shield. 

Alwys worth adding eyes to elephants IMO - make sure to add dark black eyebrows too though or it just looks weird. 

I snuck in a couple of 15mm shield transfers as a small bit of decoration on the blanket. 

Here are both elephants togther in Successor kit.

 

And the Blue elephant with a very non-historical "Roman" shield and Roman crew.

I had these LBMS transfers going spare from a much older project, and while I know they are nowhere near the right period for a Republican Roman elephant they do have the advantage of being very "Roman", and also using up some shields and transfers I would otherwise have no need for!

They are now ready to take the field ...once I paint up the 100 or so Foundry legionaries !

28mm Numidian elephant

Victrix sell a rather clever multi-use elephant kit, with 2 elephants and crew for Roman, Greek or Numidian armies all included. 

For my Numidian allied contingent (for the ADLG lists) I have pulled together a set of Numidian crew and some magnetize-on shields, all of which can be added to an elephant to make it "Numidian", with the magnets meaning its not committed to that role full time.

The kit comes with 6 "halves" allowing you to set the 2 elephants up with different alignments and arrangements of legs.

As these are to be used for multiple armies with different crew I went for a very simple plain cloth on the back of the elephant, and block colours on the howdah. 

LBMS do sell wraparound transfers for both, but that would have meant buying lots more identical elephants !

Rather irritatingly I had used up all of the dozen "animal skin" shield transfers in the LBMS/Victrix pack on the actual soldiery, so had to cobble together this rather not-quite-as-convincing hand painted set of skins for the two shields magnetized to the sides of the howdah.

Again the crew's javelins were replaced with plastic broom bristles, as these would certainly snap if you left the original Victrix ones in place and tried to actually use the elephant in gameplay. 

The mahout's hook is also rather brittle and has already been broken off, shortened and glued during painting - long before getting into combat 

4 Video Battle Reports from Kegworth

I've just posted some video batreps from all 4 of my games at the Kegworth Codgers midweek ADLG competitin held a couple of weeks back. 

You can watch along with these mostly sub-10-minute videos to see the unsubtle Parthians throw cataphracts (and cataphract camels!) into a series of defensively arrayed mostly-Roman armies with varying degrees of success 

The videos include ADLG army lists for all of the forces involved, the results from the event and an announcement about further midweek ADLG competitions.

28mm Numidian Light Cavalry

 Next up in the Numidian allied contingent (after the infantry) are the famed Numidian Light Horsemen.

These have been painted in exactly the same way as the infantrymen, with Speedpaint Holy White on a white base layer, topped off with Vallejo white for the clothing and a couple of layers of Darkoath Flesh Contrast for the skintones 

Again I went for a fairly subdued and simple palette for the Commander, with a plain red cloak and red ribbons on the banner & standard.

 

The horses are just a straight layer of Contrast on white - the "black" horse is Black Templar.

 

LBMS transfers (these are however only sold by Victrix directly) for the win, with some blending and painting-over on the edges of the transfers to get them to wrap around the edges of the shields.

I kept the horses in the main fairly pale for that desert rider look - the rope is just Speedpaint Leather on the white base. 

I did replace most of the spears with plastic broom bristles on these, as the Victrix spears are often rather flimsy so for ones that may get handled a more robust spear is better - even if drilling out the hands is a bit of a PITA sometimes. 

Next up is the Elephant! 

28mm Victrix Numidian Infantry

 With a mostly-Foundry Republican/Camillan Roman army at the head of the painting queue right now I've already done the Velites and next up I have made a start on, erm, not the actual "Romans" but instead a small Numidian allied force made up from Victrix figures.   

This is the Allied contingent's Commander on a 40mm round base. I used two of the crew from the Victrix elephant set (more of that later..), drilling and pinning a leg each to the base (as these crew don't have puddle bases) and adding arms from the infantry sprues. 

All of these figures were done with a white undercoat, Warlord Holy White "Contrast" paints on the clothing then layered with actual Vallejo white on top of that.

These are the actual infantrymen - the skin tone is done with a couple of layers of Contrast Darkoath Flesh, with some having an extra layer of ArmyPainter Dark Tone wash on top.  

The round shields all have LBMS transfers of animal skins, whereas the scutum-type shields are hand painted (as you can no doubt see), partly to save money and partly because I felt the LBMS scutum ones were actually a bit too intense in design and colour.

  

One thing to check with the Victrix / LBMS shields and transfers is that the round shields seemingly come in 3 different (OK, slightly different) sizes, and so it probably makes sense to keep the smaller shields for the cavalrymen and any Light Foot javelin skirmishers. 

The three types of round shield are very, very similar in size so if you don't realise they are different sizes it's easy to only discover this when they are glued and basecoat painted ready to take the transfers!

I kept a fairly dull dusty pallete for these, mixing up some tan and beige colour for the shields in particular on my wet pallette and doing blending and shadows on the edges of the shields with a think coat of Contrast  Aggaros Dunes or other brownish colours.

As usual, a bit of drybrushing really picks out the hair 

I did start to wonder if the Holy White "new formula" Speedpaint was still bleeding a little into the white paint I layered on top (as this wasa big issue with the initial batch) but if it is, it's actually just about perfect for creating more subtle layering than a flat grey would have been. 

The aforementioned Light Foot skirmishers, with possibly overly large shields. 

Again using the wet pallette to do some mixing of various browns and tans I think managed to do a fairly credible job of blending in the edges of the LBMS transfers up to to, and in some cases just around the actual edges of the shields.   

This is a bit of a faff, but is really worth the effort IMO as you are paying good money for a great product from LBMS, but if you leave it so you can see the edges of the design and the plastic film on the shield it's sort of all wasted IMO

And, from "ground level", here are the guys ready to hurl javelins or attack with swords! 

More to come soon!

Devizes 2024 - the Battle Reports !

In a truly surprising development, 4 "traditional format" read-along battle reports are now available for anyone who wishes to follow the varied exploits of a deeply smelly and unwashed Ilkhanid Mongol army in stunning hyper-colour  and (mostly) 28mm plastic, as they take on the Samurai, the Ghaznavids, the Burmese and finally the Mongols of Timur the Lame down in the heart of the West Country at Attack! 2024's ADLG competition.

Thrill as the Armenian-supported Ilkhanids send waves of fragrant dancing cavalry, eager unwashed knights and reluctant yet deeply sweaty spearmen out to fight a variety of almost equally colourful foes, including Mighty Shrew Elephants dressed in patchwork duvets ...

 

..bare-chested Burmese jungle dwelling tribesmen who can wiggle all of their toes independently, and...

.. the "I can't believe it's not Seleucid" Elephant Corps of Tamerland the Great and his horde of partly undead warriors and cannon fodder. 

Yes, this is a possibly welcome (YVMV) return to the old-school of battle report blogging, with rubbish captions, a probably unhealthy focus on the Mongol's poor personal hygenine, ridiculously OTT descriptive sentence structures, and the musings of both the Ilkhanid Khan and (of course) Nasty Hannibal himself  to reconsider all of the action at the end of each game. 

These battle reports are accompanied by the "Melksham, Don't Mind if I do!" edition of the Madaxeman (Video) Podcast.