Some "Yuge" War Wagons !

 Having sold a few of the textbook Essex War Wagons in recent years, I've accidentally drifted back into owning more than I will ever probably use as a result of picking up some because they looked interesting, and more latterly being given some 3D prints as giveaways along with competition entry. 

Mixing metal ones from different manufacturers, 3D prints in resin and even an MDF one does however lead to some serious variations in scale, or perhaps more accurately, "size" between the different ranges - and that is very much reflected here! 

This one was a 3D print handed out to competitors at the Akra Leuka Tournament in Alicante in January 2025.  I've added some Essex & Mirliton crew who are sort of randoms, all picked out of the bits box. The wagon is enormous and I needed to sit the crew on 2 lolly sticks to give them the extra height to see out. 

This cute little box on wheels is the Fireforge MDF kit of a 15mm war wagon. The wheels are a bit "Fred Flintstone" and it comes without the oxen, again from the bits box (I think Mirlitons Carroccio wagon comes with 4 which was too many to fit on a base) so these have at least got some wagon-pulling experience in a previous life

The lid of the Fireforrge MDF kit does however lift off, and they supply this folded-out lid that becomes a pavise shield thingy too. Even so its a huge blocky wagon.

Here is the 3D print and the MDF kit side by side. 

And, for a contrast, the 3D printed wagon and a Museum wagon side by side. 

I guess I know which one I'd prefer to be defending!

From the other side the sheer scale of the folded-out roof on the 3D print is even more striking.

Here is the front-on view. No room for horses or oxen on an 80mm long base with the 3D print.

This is the Museum wagon. They are ridiculously good value, especially in the annual Museum sale when you can pick them up for under £4 each.

Having draft horses as well is a bonus - my bits box is only so deep after all!

This is the 3D print again - the flag is one I Googled looking for a Hussite Flag

The imposing wall of defence - ideally they will only attack from this side!

I haven't glued the crew in though, so if needed they can turn around as a block of 4 and fight over this side too.

All in all a real mix - I suppose there is no reason all "wagons" would be the same size (unlike say, people or horses) but if I do get these all on table at the same time I am sure some eyebrows will be raised nevertheless!

Devizes 2024 - the Battle Reports !

In a truly surprising development, 4 "traditional format" read-along battle reports are now available for anyone who wishes to follow the varied exploits of a deeply smelly and unwashed Ilkhanid Mongol army in stunning hyper-colour  and (mostly) 28mm plastic, as they take on the Samurai, the Ghaznavids, the Burmese and finally the Mongols of Timur the Lame down in the heart of the West Country at Attack! 2024's ADLG competition.

Thrill as the Armenian-supported Ilkhanids send waves of fragrant dancing cavalry, eager unwashed knights and reluctant yet deeply sweaty spearmen out to fight a variety of almost equally colourful foes, including Mighty Shrew Elephants dressed in patchwork duvets ...

 

..bare-chested Burmese jungle dwelling tribesmen who can wiggle all of their toes independently, and...

.. the "I can't believe it's not Seleucid" Elephant Corps of Tamerland the Great and his horde of partly undead warriors and cannon fodder. 

Yes, this is a possibly welcome (YVMV) return to the old-school of battle report blogging, with rubbish captions, a probably unhealthy focus on the Mongol's poor personal hygenine, ridiculously OTT descriptive sentence structures, and the musings of both the Ilkhanid Khan and (of course) Nasty Hannibal himself  to reconsider all of the action at the end of each game. 

These battle reports are accompanied by the "Melksham, Don't Mind if I do!" edition of the Madaxeman (Video) Podcast.

 

The Last Almughavar

 Nope, it's not a new Spanish-language film to get history buffs excited, it is instead the final unit of Fireforge Games Almughavars which have finally been snipped from the sprue and added to my Medieval Spanish (& Feudal Spanish) armies. 

As with the others (unsurprisingly) these guys went together really easily, although for Almughavar purists you will see that I rather ran out of left arms and had to give a couple of the guys lurking at the back a shield in order to round out the unit.

The big innovation here was to add in a morning star from the Fireforge Crusading Knights box set, thus giving the lead dude a pretty cool and unusual choice of anachronistic weaponry to lead the line with.

I originally did this by gluing on an army from the box of Knights, which meant his right arm was fully mailed while his left was in Barcelona-summertime attire of short sleeves - something I sort of justified to myself on health and safety grounds to do with using a flailing set of spiked balls as a weapon.

After basing the unit though I realised this actually just looked weird, so I snipped the offending mailed arm off at the shoulder (it came off cleanly as this was where the join was located) and then added a new short-sleeved one which had originally been holding a spear.  

The spear I cut off cleanly just above the fist, and then using plastic cement (airfix glue in old money) carefully attached the handle (?) of the morning star, having also snipped that off cleanly just above the mailed fist that was holding it.

This all pretty much worked OK, as airfix glue melds the two bits together making a very strong join - but just to be belt and braces I also had positioned the morning stars such that I could superglue one of them to the top of the owners helmet for that "second point of contact" to make the joint more stable.  

So, here they are ready to go, with the newly upgraded arm in pride of place. 

(I won't mention that there is a chap in the second rank with a fully armoured right arm holding a mace, who I couldn't quite reach after fixing the figures to the base!) 

 

The Taifa Andalusians head to the West Country

With the warmth of Spain now a distant memory, barely a week after going to Alicante with the 15mm Berbers it was time for the 28mm Taifa Andalusian army to try it's luck on Southern shores as I headed to the PAW show in Plymouth for some more ADLG action.

The army featured Almughavars, Knights, Spearmen and all sorts of other odds and ends, most of which you will have seen in the paint queue on this website at some point in the last couple of years.

Over the 4-game weekend they took on the Christian Nubians, the First Crusade and a couple of Sicilian Norman armies as well, all of which has been documented in 4 separate 10-15 minute videos in which I attempt to explain what I thought I was trying to do!

See how the forces of the Reconquista (and those who perhaps weren't so keen on that idea too) fared in these 4 reports from PAW

Fireforge Feudal Knights

I've been gradually building out a Feudal Spanish/Taifa army from the basis of my existing 28mm Arabs, a handful of Norman-style spearmen and some bring and buy metal knights, but what's been missing has been some "not all fully caparisoned" knights to distinguish the Elite from the Ordinary.

So, when shopping at SELWG, a box set of the Fireforge Templar Knights ended up being the solution, and here they (already) are:

I recycled some very old Space Marine waterslide transfers for these, as my painting isn't neat enough to do sharp-edged crosses

The guy (or as they are a kit, the arm) with the flail is pretty cool. The sprues come with more than one of these so my next Almughavar base may end up with a guy armed with this too!

More upcycled Space Marine graphics - I very roughly painted in some extra texture into the white-only transfers of the Pegasus and the stag's head to give them a bit more depth.

This guy doesn't have a weird helmet - its the mace of the guy in the middle (who also has a GB Arab head to make these feel a bit more El Cid "Spanish Reconquista" era) 

The painting-in is more visible here on the barding

Every time I do it I regret starting a check pattern, but this one is not too bad IMO

A jolly nice set which have painted up quickly and effectively! 

Another unit of 28mm Spanish

 Yes, in my gradual and partly accidental attempt to create a 28mm Feudal Spanish/Sicilian Norman type army, the next unit on the testing line is some Fireforge Almughavars

I bought these from Dave Thomas up at Britcon last weekend, and quickly put together a unit/base from 6 of the 24 figures in the box, undercoated them in black, did a bit of highlighting in white (a cheapskates Azimuth Spray I guess) then set to work with normal paints and some Army Painter washes.

They have gone together very neatly - every set of arms is mail-clad, which makes joining them to some of the torsos a bit easier as you don't have to get a perfect match with the cloth/tabard guys shoulders.  

Dave From The Podcast keeps telling me Almughavars didn't have shields, but there weren't quite enough left arms on a sprue to do all 6 guys without shields, so maybe I am reflecting the balance of academic views on this (if its about 83% of scholars think they were unshielded, 17% think they were shielded). 

The figures look a bit cartoonish on the box art, but having painted and based them I suspect that impression is down to Foreforge's painters style rather than anything inherent in the figures. 

They came with square plastic bases, but I didn't want to have to build up the baseplate with filler to hide these, so instead pinned a leg on each dude to the MDF base - being hard plastic they were very easy to drill with a pin vise. 

They are also normal sized - some Fireforge stuff is a bit big - and their spears have been made to a sensible non-easily-breaking thickness too, unlike some of Fireforge's earlier Arab cavalry bows, which I have already.

They come with glue-on swords, scabbards, pouches etc allowing them to be well customized 

These were (of course) given the Army Painter effect to leave them with a dirty Middle Ages feel. 

Taking the photos I realised I'd not gone back to do their helmet nose-guards in gunmetal, so that's now been done - just squint and I'm sure you can imagine it in metallic silver!

I also then remembered I had a turntable as well that I bought ages ago - so managed to dig it out and do a few spinning around videos too. Not sure how well Blogger will render it though - so apologies if its a bit crappy.

All in all I am very happy with them, and once the other 18 are done I will have a very nice (and if anything more "realistic" than the box art and unpainted figures might suggest) set of 24 Catalan Almughavars.