28mm Numidian elephant

Victrix sell a rather clever multi-use elephant kit, with 2 elephants and crew for Roman, Greek or Numidian armies all included. 

For my Numidian allied contingent (for the ADLG lists) I have pulled together a set of Numidian crew and some magnetize-on shields, all of which can be added to an elephant to make it "Numidian", with the magnets meaning its not committed to that role full time.

The kit comes with 6 "halves" allowing you to set the 2 elephants up with different alignments and arrangements of legs.

As these are to be used for multiple armies with different crew I went for a very simple plain cloth on the back of the elephant, and block colours on the howdah. 

LBMS do sell wraparound transfers for both, but that would have meant buying lots more identical elephants !

Rather irritatingly I had used up all of the dozen "animal skin" shield transfers in the LBMS/Victrix pack on the actual soldiery, so had to cobble together this rather not-quite-as-convincing hand painted set of skins for the two shields magnetized to the sides of the howdah.

Again the crew's javelins were replaced with plastic broom bristles, as these would certainly snap if you left the original Victrix ones in place and tried to actually use the elephant in gameplay. 

The mahout's hook is also rather brittle and has already been broken off, shortened and glued during painting - long before getting into combat 

Successor Hit Markers in 28mm

I'm gradually assembling specialist casualty markers for many of my armies, and the latest set are for my 28mm Successors

Luckily Victrix include a lot of extra shields in their packs, especially for cavalry figures, and of course over the years I have accrued many metal and plastic ones from other sets so I have a lot available to make these three types of marker

In a rocket-science level bit of planning I use 3 shields for 3 hits, 2 for 2 hits and a single shield for one hit.

I've even splashed out and used up some un-needed LBMS transfers on some of them - possibly the most expensive casualty markers in the world!

 I always give them a few thick coats of liquid poly varnish before finishing in matt varnish, as they will inevitably get chucked in a bag somewhere - so a few coats of poly tends to make them pretty scuff-proof 

28mm Kitbashed Thracians - WiP

 One of the back-burner projects I have is a 28mm Hellenistic army - I've been slowly buying the figures over the last year but not really starting it until I have them all in hand (and have finished many other projects first too!).

However... 

...I've been wondering if I can kitbash some Thracians out of the Victrix Peltasts and their Dacian Warriors kit, with the Dacians providing heads, arms - and romphias - and cloaks from some of the excess spares that Adam has collected in building his own proper Dacian army.

I've done a single test base so far, which is yet to have static grass and tufts added, and is also yet to be matt varnished, but is now at a sufficient WiP stage to be worth sharing:

 LBMS "peltast" transfers of course, picking out the more "Thracian" (yeah, right...) ones. If you look carefully you can see that some of the hands are "reversed" where I decided it was perhaps too hard to trim off the wrists and repose left hands to right hands - but you do need to look quite closely indeed!

I'll try and get them finished off and varnished in the next week or so. 

 

A Flurry of Podcasts

Over the last couple of weeks I've been busy chatting online with some of my CLWC cubmates, and the result is a positive flurry of podcasts which are all now available on Podbean, on iTunes and now also on Spotify to be background chatter to yoru weekend of painting. 

First up is a one-off special ADLG 'cast looking at some of the ways to design a New Kingdom Egyptian army list to get the best out of this historically popular, but hard to run army. The 'pod had input from Richard Case, who's previous podcast on the Sassanid Persian army proved very popular.  This podcast is also available to watch and listen to on YouTube with some pictures of NKE figures and match report photos as well.

There are also now two special bonus episodes of the Madaxeman Podcast online, each addressing a very specific topics. The first bonus episode on the vexed subject of how to choose a paintbrush (and how much to spend on it) has been out for a week or so already and has been downloaded almost 100 times so far. A follow-up episode in which the subject of different types of Glue is discussed was also released earlier this week.

Finally, just in time for your weekend of painting the 8th "Lockdown Special" has been released today covering a broad range of important yet strangely rarely discussed topics such as what colour should rigging be on a 1/240th scale 19th Century Ironclad, do Gnomes still have a place in modern warfare, can a camel get a tan if it stands out in the desert too long, is the Austrian army a painters dream or simply a signifier of laziness, if a Grenzer joined the cast of Eastenders would he become a Geezer, is it still legal to resist buying 10mm Napoleonics and does getting your children to paint Perry plastics fall under the remit of the Modern Day Slavery act?

There is also a phenomenally long discussion on how to assemble and use Hannibals Carthaginian army under ADLG (and instructions on how to skip over it if you're not interested in ADLG list building), and a new feature on what games we have actually played in the last week. Oh, and Andy's Quiz returns - cue the music!  

These and all previous episodes are now available on Podbean, on iTunes and now also on Spotify

New Museum Miniatures Hoplites

With most of the world in lockdown, everyone's minds turn away from gaming and towards... painting and mail order!

For these chaps the mail order bit had been done during January in the Museum sale, making these figures pretty much the cheapest metal (or plastic - yes, I did the maths!) on the market right now, which is remarkable given they are the new digitally sculpted Museum Hoplites from their new "Z" range. 

The paint job is definitively incomplete, but rather than wait until they are finished I thought some WiP shots might be good to get out into the internet-verse right now, partly as everyone is sat staring at a computer trying not to OD on (usually depressing) news, and partly to try and inspire you to support some of the gaming hobby retailers who will be missing out on trade show impules purchases for the next few months or so.

The Museum figures can be bought with LBMS shield transfers - which you can only buy from Museum themselves.

There are only 3 basic poses, but you can get (I think) 4 different states of undress for the men as well, which means there is more variety apparent from the back than the front.

Museum also do a range of helmet crests - all of the helmets are the same across the figures (at the moment..) but you do hardly notice that - at least with my painting !

I have given some of the shields a coloured edge to add a little bit more variety to the figures - once they are finished I might do a few more with bands of alternating light and dark for more interest too.

LBMS do a special range of 11mm diameter transfers for these guys because the Museum Z-range shields have been designed to be bigger, and flatter than most other manufacturers hoplite shields, specifically to take LBMS transfers more easily. I have a suspicion this might even have been something I actually suggested to Dave at Museum when he posted some WiP shots of the sculpts on Facebook... but that may just be me making stuff up to make myself feel more important!

The hoplites feet have really well-cast sandals - these have no more complex paint job that flesh paint with a diluted coat of army painter wash to create the detail in the sandals.

Likewise this guy is just wash over matt flash

Here they are next to some Chariot Miniatures and Essex hoplites. Apart from making my 20 year old attempts at painting shields look suddenly pathetic you can clearly see the difference in shield sizes, and in figure height  - I suspect this is enough to make these Museum guys a little difficult to mix with other manufacturers for most wargamers.

The Museum guys "might" be on slightly taller basing, but probably only 1mm, as they are on 2mm MDF with no magnabase, whereas the other older chaps are on hardback envelope card + magnabase

This is a shot of the Museum guys with some Xyston - I think these are Theban - Hoplites. A better fit, but the shields are still noticably bigger

Here they go toe to toe

And with Xyston Paphlagonians - a relatively new figure for Xyston I think?  These seem a better match.

And a set of two bases.

The shields are big enough that I have managed to base these in 7's, using afront rank of 4 and then 3 behind for an ADLG Heavy Infantry base - fitting two ranks of 4 might well have been a bit of a crush.

There's still plenty of tidying up of these to do, and I also need to decide if I base them with sandy-coloured wood filler or use the sand + woodstain + drybrush technique that my newer Biblical armies now are mounted with.

Once they are done they'll appear here again!   

Saga Vikings

Well, I've finally cracked and got myself a SAGA army, of course of Vikings. They ended up being painted quite quickly, and for those of you who have not been following my Facebook Page, here's the progress

The Saga Viking warband...early stage preparation as I finally get back to painting and playing...black undercoat sprayed on, using 2p coins and some Renedra bases I got in an army pack from Gripping Beast. This was taken August 20th. And why do Renedra bases cost more than 2p each ... ?

24th August - All the metal bits, and a first "colour" - in this case Coat d'arms Linen. This might be quicker than I expect... The figures are a mix of Gripping Beast and Wargames Foundry

25th August - Always interesting how much figures can change from this block painting stage to when they get inked later on.

25th August - Gloss poly varnish on the shields, in preparation for some Little Big Men transfers tomorrow - bit of bronze and gold on the jewellery, brown for the backs of shields and wooden spears and they'll be ready for Army Painter..

25th August - Ready for the shield transfers in the morning... Then the Army Painter magic by lunchtime...!

26th August - All glossed up with Army Painter (not the shields with stickers on them - they get clear poly varnish as a topcoat), and then outside to dry .. it's a nice warm day so maybe spraying matt varnish later ? The shield designs are from the LBMS "GB (Large)" and "Foundry, Artizan & BTD" ranges and really make a huge difference to the quality of the figures

26th August, almost all done.... A good weekends work.. all based with builders sand, awaiting some grass and the like on the bases.

I may add some more photos once they are totally done and on the table