A few more 28mm Hellenistics

 Slowly making their way to the "done" pile of my 28mm Successor and Hellenistic project are some more pikemen, and a rather random find of what I suspect may be very old Wargames Factory Hoplites 

These are the second base of Mercenary pikemen - another great set of LBMS shields

This time I elected to do a few more of the edges in colour, rather than aimong to put metallic rims on them all 

They still have a lot of random heads though, as befits a random collection of Mediterranian mercenaries 

A LOT of different headear going on here 

And with the full set of, erm, one other base. 

The Elite Argyaspids also got a second base of pikemen

The new base doesn't have the commander and standard bearer figures on it 

These are the slightly smaller and slighter hoplites - I ended up with 24 of them pre-made but unpainted 

Shields are LBMS and some upscaled homw brew waterslide transfers using images found online 

At this stage I'd just used Darkoath Flesh as the flesh - no highlights on these - but I did add some flesh paint highlights lafter this was taken

They are all about the shields really - but honestly the Victrix figures of today are much nicer

Even a few left over to do an officer base (as I could only fit 7 on each 60mm base really)

Victrix Successor Pikemen in 28mm

 I've already posted a few articles about my (of course over ambitious) project to create a generic Hellenistic/Successor army in 28mm, which started with the lighter troops and peltasts, and then added some Galatians and some cavalry... all of which was really a rather folorn effort to put off tacking the Phalanx for as long as possible!

The dread of the Phalanx is twofold. 

First up, it's a lot of near-identical, uniform figures, which always makes painting a bit of a chore. But more importantly I had decided that the Victrix spears were simply too flimsy to use as-is, and instead that I would drill out the pikemen's hands and add in metal pikes instead.

If this wasn't too easy, I also decided to go a little off-piste on the headswap front, throwing in all sorts of plastic heads from the spares box (which has all sorts in it!) as well as mixing it up with the rather good range of heads that come on the Victrix sprues. 

Oh, and as if that's not enough, I also got a pack of Successor metal heads from Aventine to shake things up even more, as I do really like my troops to look like battle-worn veterans and the whole "I'm not using standad kit!" thing is a big part of that.   

And, to make things even harder I tried to create that "might not be a real thing" joining-type-bit that wraps around the middle of each pike by using tiny strips of normal paper soaked in quite a lot of PVA glue. 

Oh, and did I mention that I then bought two sets of Victrix Argyaspids on the mistaken assumption that they would be pikemen? They are in fact armed with spears, so the decision to drill out their hands and add metal pikes wasn't even one I had anychoice over in the end - I simply had to do it once I started. 

Dodging some rather chilly and wet spells of weather along the way, I eventually ended up with 2/3 of the total number of guys all primed and ready to start painting.  

And here's an intermediate step, with the LBMS shield transfer rushed into place a little earlier than maybe is sensible simply to give me some encouragement that they would actually be worth the effort in the end. 

What you can see here quite clearly is that there are two sizes of shield - something I only spotted in the nick of time - with the Argyaspid shields being slightly bigger. The bodies of the Argyaspids and Macedonian Phalanx sets are pretty similar, only slight cosmetic differences in the straps that I guess support the shield, but near enough identical so I could use them interchangeably on all of my pikemen.

I also - which you can also see here - used some different arms from the bits box to hold the pikes.  This was in part to create even more variety in posees, but was mostly because it's impossible to drill out 48 plastic arms and hands without messing a few of them up, so you need some replacements. 

Some look a bit clunky but will get lost in the Phalanx I'm sure..?

And, eventually here we are, getting somewhere at last with the Veteran Mercenary phalanx set of LBMS transfers in place and the men mostly finished. 

At this stage I have painted the pikes in my standard Ochre Brown, and used a dark brown to paint the joining-bit bits, so I can use a lighter colour to do a bit of a very basic twisted rope effect later. 

And here's a close up so you can see exatly how basic it actually is.  The guy on the right has been a receipient of a donated arm, which does look a bit odd from this angle. Perhaps he needs to be in the  middle of the block of 12 men? 

This is three ADLG units of 12 pikemen all based up and ready to be finished off with some sand and woodstain.  

If you count you'll see that they are based in 4 ranks of 3 files per base, with each base being a standard 60x60mm. I had originally assumed that they would end up as 4 files and 3 ranks but the shields are just a bit too big, and the pikemen's stance is too wide to make that work without staggering the figures in each rank (which would look wierd for a Greek-style well drilled Phalanx), so 3x4 it has to be. 

At least it gives the shields more room to shine. 

This is the finished  article, a Veteran/Mercenary unit with a right rogues gallery of characters and headgear on display. 

The chap front left is a Gallic cavalry head I think, and the chap in the middle is probably a Turk or Mongol cavalryman who looks ready to fight pretty much anyone!

There is even a Persian in the middle with a fetching blue bubble hat!  

I blended the red shield transfer at the back into the full shield with some paint mixing, but for most of the rest I left a black circle around the shield and then did a rim of bronze, which I touched up again after the matt varnishing stage to give them some extra shine and 'ping'. 

Plenty more random heads on display here. 

I did the linen armour by starting with a base coat of Holy White from Warlord Games Speedpaint range, and then blocked in the big flat areas in simple white, as well as picking out the petruges (?) on their armoured skirts in white too. 

I did try a black undercoat initially but found it too harsh, so the grey of Holy White, and the way it pools and darkens around the edges is a good alternative. 

These chaps have ended up as the Argyaspids - that whole "My Boss's face on my shield" thing must indicate some exceptional level of loyalty to the cause! 

 

As they will most likely be the Elite chaps I added in the officer, standard bearer and trumpeter to the base - putting the trumpeter at the back and the standard bearer in the middle so their rather flimsy trumpet and flag would be a lot harder to break in normal handling. 

I think there is also a logic to the trmpteter at least being at the back to sound the commands for the Phalanx to follow?

These are the standard Phalangites - slightly smaller shields than the Argyaspids. It's a little frustrating that the info on the Victrix site doesn't make it explicit which sets of shield transfers fit which set of pikemen, but with a mix of types to choose from I managed to muddle through OK.

You can see a lot of the headswaps here - even a chilled out dude in a Cretan floppy hat, who is of course towards the back of the unit.  

Although there seems to be another more foolhardy Cretan in the front rank too..

This was the officer - some of the packs come with 3 extra figures, and rather strangely the command sprue has two sets of legs wearing trounsers as well. 

This isn't really enough to change a full 24-man Phalanx to "Asiatic Successors" (!!) but I did manage to use them and put them in the front rank so visually it does have a material effect on how they look.

The officers in this army are clearly better fed than the rank and file phalangites! 

All in all, I'm really chuffed wth how they have turned out. Drilling out the hands is a real PITA, and nothing can hide thatfact, but I think it's been worth it in the end. 

Now I only need to steel myself to finish off the final 24 to add to the 48 I've already done!

28mm Hellenistic Cavalry

My Successor/Hellenistic project moves on apace, with a recent spell of dry(ish) weather allowing me to do some outdoor spray undercoat, and then matt varnishing to make a dent in the cavalry contingent of this almost-all 28mm Victrix army.

An ever-increasing proportion of my painting is drifting towards Contrast (and Speed..) Paints, and the horses in this army I think will all end up being completed in this "so good it feels cheaty and a bit dirty" medium. 

 

Agaros Dunes is the leopard pelt colour here, with the firm favourite of Warlord Holy White for the grey horse. 

These are Heavy Cavalry lancers - I replaced the Vixtrix-supplied lances immediately, as they are very obviously not going to stand up to any sort of wargame handling at all, and drilled out the hands (manually) to accommodate home-made spears from 1.1mm (0.45") styrofoam round rods from Plastruc. 

These are really flexible, so will bend but not snap while also being really lightweight - a great combination where metal spears of this length would no doubt end up getting caught while being handled and then would break off the guys hands at the wrist. 

The Plastruct material is also really soft, so I was easily able to squash the ends of each spear flat, and then cut it into a V shape to form spear points which are also wider than the spear shafts.

If you want to pick some up for yourself, here's an affiliate link to eBay UK https://ebay.us/QLbKOr (and if you end up buying anything from it I'll geta teeny tiny commission from eBay too!) 

These are javelin-armed regular cavalry - I think the spears are a mix of the Victrix originals and also some slightly more robust Gripping Beast ones from their Roman and Arab boxes. 

If you keeping all of the spare arms you can then cut some spear-holding hands off at the wrist, do the same with the Victrix guys wrists and then glue the GB hands and spears to the Victrix guys arms to give your troops more robust spears, straight out of the bits box  

The white clothing on these cavalry is normal white paint layered over a base of Holy White - shield patterns from some spare Hoplite waterlide transfers, on a shield painted with a Contrast Orange which I think gives a really good "it could be burnished bronze" effect.

More pics to come over the next few days. 

Peter Pig Pikemen

 Peter Pig recently released a rather surprising (for them..) new set of hellenistic pikemen and command, in what looks to the the start of a new range to complement some of their small but perfectly Piggily-formed Greeks, Romans and their enemies (Germans, Parthians etc).

As a general fan of all things Pig - and with a mate putting in an order for some WW2 stuff I could Piggy-back (ahem) onto - I thought I should pick up a set and give them a whirl. 

They are all cast without pikes - very much the modern style I think, and a good idea all round especially for anyone like me who has long since bought a plastic-bristled brush to make endless numbers of 15mm spears out of !

The pikemen figures have one basic pose, alhough I think the heads look in slightly different directions on them - when they are ranked up it's hard to tell.  

The castings are effective when painted and based en mass, as you can see from these who have had a black undercoat with fairly quick and simple drybrushed metal armour, and then some basic colours for flesh added - however I did feel that it would have been rather challenging to paint them "better" than this, as a lot of the detail seemed in hard to get to places on the figures, or perhaps was not as paint-friendly and sharp as I had initially hoped when looking at the castings themselves.

  

The officer pack has 8 figures too, with a couple of standard bearers, officers with swords and trumpeters. The pikemens shields are of the "tiny" persuasion, making it pretty tough to put any sort of pattern onto them - VVV transfers would I'm sure be too big by far, although I'm told that LBMS may do a very small range for Forged in Battles' similarly small-shielded pikemen that could maybe fit.

Squeezing in a second standard at the rear of the base has allowed me to make up a 12-man ADLG pikeman unit with only 1 pack of actual pikemen and one of officers (who'd do perfectly well as officers for the other PP "hellenistic" set, the 2 packs of City Militia Peltasts in the Parthian range)

The spare officers I used to make up a small command stand with a fairly low-skill banner design to boot!

And here they are ready to fight. 

In many ways these figures reminded me of some QRF Medieval Swiss figures I have in the same army as some from Mirliton - just like the QRF Swiss, the level of detail on these chaps isn't perhaps as good as some other ranges out there, but when massed together it's really difficult to tell the difference - and pikemen are always all about the mass effect.

All in all they are a solid if unspectacular addition to the already extensive roster of  "true" 15mm pikemen out there - especially if you want small shields, angled pikes and open hands. 

Personally speaking having done these I think I'm a bit of a "bigger shield" and "vertical pikes" man myself, as I find that generally more  practical for gaming and it also allows the shield patterns to offset my own sometimes patchy painting standard!