3D printed Knights

 My adventures in 3D printing continue to slowly gather pace, although not by any stretch of the imagination at a pace which will see me take up 3D printing as a hobby anytime soon!

No, instead of that I've just gone onto eBay and bought some 3D printed "15mm" Knights designed by Eskice Miniatures and sold on eBay UK by Hoplite Miniatures. 

I did sort of want some of these Knights (full armour, no horse barding) but the purchase was as much to see what 3D printing could deliver today, a year after buying some very definately "scaled up 10mm" dollies for an Etruscan army. And, also, these were very cheap indeed at just £12+ P&P  for 24 cavalry figures.  

These are the figures that arrived in the post shortly afterwards - the pictures are taken on a half-inch grid (that's not because I'm an old Imperial-measurementalist, its just that the metric side of this double-sides cutting board is by now totally f---ed).  

They are big chunky models, and are (as scaled by Hoplite Miniatures) pretty big for "15mm", being a chunky 18mm if you are generous, or a fat 19mm if you are not so inclined. 

There were 7 different knights in a few different poses, and as you can see they are pretty clean with only a few little nubs of support still left on that I was easily able to snip off with sprue cutters. 

The horses though were very well-fed wolf-ish, and at this stage I was a little concerned that they might not really cut it, both in terms of style and scale against other 15mm metal and plastic figures I already have. 

But, painted up I think they have come out surprisingly well given that rather lumpy looking start.

 

With paint, shading and washes the horses have largely (but not entirely..) lost that "giant racing lemming" look, with the detail really picking up the Army Painter wash (and in some cases GW Contrast Paint main colour) quite well.  

I deliberately did the shields in simple geometric designs to keep them in the style of the Corvus Belli 100YW knights I painted earlier this year,  ducking the opportunity to add papper printed designs to them. Some of the shields (the round ones) wouldn't take a sticker anyway, but I do wonder if more detailed shields wouldlift these guys even more? 

The lances are surprisingly flexible, with quite a lot of "give" in them, making these much more robust  for such narrow bits of printing than some of the other printed resins I've seen, so from that I suspect materials technology is moving on apace in the 3D printing world.

Having said all that, I did manage to snap two of the lances off when I was taking these photos having done no damage to any of them at all in the preceeding painting and basing stages - they did however glue back on pretty easily with superglue, as the breaks were very clean. 

I only did barber pole stripes on a few of them, not wanting the units to look like a fairground ride with too many striped poles. 

The running horses are actually too long (when printed at this scale) to fit on a 30mm deep base, but I did manage to find some 35mm deep bases I had lying around and they managed to fit pretty well on those. 

So, all in all these are very nice, while also not really being all that close to the standards of good 15mm metal-cast figures from established sculptors. they are however leaps and bounds better than the "Playmobil" figures I bought last year, and are more than perfectly servicable for one-table usage.

The oversized impression from the raw prints seemed to be greatly mitigated by a count of paint and standardized basing - and I imagine that it would in any case be perfectly possible to print them slightly smaller just by changing some settings on the machine anyway.

So, the 3D future is almost here - not quite, but certainly getting closer every day. It will just take a few more folks to pick up their mouse (?) and noodle away at designing figure ranges, presumably just like whoever is designing stuff under the Eskice brand banner and suddenly there will be enough interest and enough competition for design to reach that next level - and if (OK, "when") that is matched with advances in materials tech too it'll not be too long until the choice between printed and cast ranges is a very difficult one to call indeed. 

I plan to take some size comparison photos and post them up in the next few days as well.

(Here's an affiliate link to Hoplite MIniatures eBay store: https://ebay.us/NbWnTW)

. 

The Gauls at Roll Call - 5 new ADLG match reports

 Having wheeled out (see what I did there..?) the Assyrians in a 25mm period at last year's Roll Call tournament, this time around I had resolved to dive into the somewhat deeper and more murky 15mm pool to give yet another rarely-seen army a proper outing post-Covid.

The theme was a somewhat intriguing "Roman Pond" - armies who might have been able to go paddling in the Med in the timeline encompassed by any of the Roman Republic or Empire armies in the ADLG book, which cut off most of the Cataphract-heavy options from a more traditional Roman themed period, making players armychoices rather different (aka altering the "meta") as a result too. 

With that in mind, and a wish to continue to test some of the less fancied armies and new v4 rules, I settled eventually on the often overlooked but in theory quite popular Gauls.

The outcome was the following 5 extremely verbose battle reports full of the usual nonsense of speech bubbles, laboured metaphors, hyperbollix language and out of place references to local foodstuffs - but this time with post-game analysis from Asterix & Obelix (as well as Hannibal)!  

Pull up a baguette, put a pot of Magic Potion on the stove and get ready to read all 5 of these Gallic Battle Reports at your leisure !

The Last Almughavar

 Nope, it's not a new Spanish-language film to get history buffs excited, it is instead the final unit of Fireforge Games Almughavars which have finally been snipped from the sprue and added to my Medieval Spanish (& Feudal Spanish) armies. 

As with the others (unsurprisingly) these guys went together really easily, although for Almughavar purists you will see that I rather ran out of left arms and had to give a couple of the guys lurking at the back a shield in order to round out the unit.

The big innovation here was to add in a morning star from the Fireforge Crusading Knights box set, thus giving the lead dude a pretty cool and unusual choice of anachronistic weaponry to lead the line with.

I originally did this by gluing on an army from the box of Knights, which meant his right arm was fully mailed while his left was in Barcelona-summertime attire of short sleeves - something I sort of justified to myself on health and safety grounds to do with using a flailing set of spiked balls as a weapon.

After basing the unit though I realised this actually just looked weird, so I snipped the offending mailed arm off at the shoulder (it came off cleanly as this was where the join was located) and then added a new short-sleeved one which had originally been holding a spear.  

The spear I cut off cleanly just above the fist, and then using plastic cement (airfix glue in old money) carefully attached the handle (?) of the morning star, having also snipped that off cleanly just above the mailed fist that was holding it.

This all pretty much worked OK, as airfix glue melds the two bits together making a very strong join - but just to be belt and braces I also had positioned the morning stars such that I could superglue one of them to the top of the owners helmet for that "second point of contact" to make the joint more stable.  

So, here they are ready to go, with the newly upgraded arm in pride of place. 

(I won't mention that there is a chap in the second rank with a fully armoured right arm holding a mace, who I couldn't quite reach after fixing the figures to the base!) 

 

Peter Pig Pikemen

 Peter Pig recently released a rather surprising (for them..) new set of hellenistic pikemen and command, in what looks to the the start of a new range to complement some of their small but perfectly Piggily-formed Greeks, Romans and their enemies (Germans, Parthians etc).

As a general fan of all things Pig - and with a mate putting in an order for some WW2 stuff I could Piggy-back (ahem) onto - I thought I should pick up a set and give them a whirl. 

They are all cast without pikes - very much the modern style I think, and a good idea all round especially for anyone like me who has long since bought a plastic-bristled brush to make endless numbers of 15mm spears out of !

The pikemen figures have one basic pose, alhough I think the heads look in slightly different directions on them - when they are ranked up it's hard to tell.  

The castings are effective when painted and based en mass, as you can see from these who have had a black undercoat with fairly quick and simple drybrushed metal armour, and then some basic colours for flesh added - however I did feel that it would have been rather challenging to paint them "better" than this, as a lot of the detail seemed in hard to get to places on the figures, or perhaps was not as paint-friendly and sharp as I had initially hoped when looking at the castings themselves.

  

The officer pack has 8 figures too, with a couple of standard bearers, officers with swords and trumpeters. The pikemens shields are of the "tiny" persuasion, making it pretty tough to put any sort of pattern onto them - VVV transfers would I'm sure be too big by far, although I'm told that LBMS may do a very small range for Forged in Battles' similarly small-shielded pikemen that could maybe fit.

Squeezing in a second standard at the rear of the base has allowed me to make up a 12-man ADLG pikeman unit with only 1 pack of actual pikemen and one of officers (who'd do perfectly well as officers for the other PP "hellenistic" set, the 2 packs of City Militia Peltasts in the Parthian range)

The spare officers I used to make up a small command stand with a fairly low-skill banner design to boot!

And here they are ready to fight. 

In many ways these figures reminded me of some QRF Medieval Swiss figures I have in the same army as some from Mirliton - just like the QRF Swiss, the level of detail on these chaps isn't perhaps as good as some other ranges out there, but when massed together it's really difficult to tell the difference - and pikemen are always all about the mass effect.

All in all they are a solid if unspectacular addition to the already extensive roster of  "true" 15mm pikemen out there - especially if you want small shields, angled pikes and open hands. 

Personally speaking having done these I think I'm a bit of a "bigger shield" and "vertical pikes" man myself, as I find that generally more  practical for gaming and it also allows the shield patterns to offset my own sometimes patchy painting standard!

More Plastic Medievals - this time some cavalry

 In my continuing quest to buy up what seems like the entire Corvus Belli medieval 100YW range in Siocast, the third installment was a pack of mounted sergeants that I actually paid full price for (!!) at Warfare last year (unlike the bring and buy bargain that made up the initial purchase). 

This gave me 18 mounted figures to act as the lance-armed cavalry who support the proper Knights in a host of Medieval armies, these guys being sufficiently generic (for me...!) to work in almost any western -ish (I say that because I might try them as Hussite cavalry one day) European Medieval army.

These guys seemed to be made with plastic that was a smidge harder (aka less "Airfix 1/72nd scale"-style) than the other Siocast figures I picked up and painted earlier in the year. 

I've not seen anything from PSC to say they are now using a newer version of the Siocast resin, but on the basis that Warlord Games have made exactly such an announcement recently it's not an unreasonable guess that PSC have also migrated (or been migrated by the Siocast people?) to a new formulation too.

I used a black spray undercoat on these, in order to give me the sort of deep shadows that make the padded leather jerkins really pop - the best thing about these figures IMO, and well worth making the effort to paint them carefully so they stand out. 

To get some colour into them I did 2 bases with blue jerkins, 2 with red, one with green and one in a more plain brown leather. 

The white bit is a set of diagonal stripes, which were cleanly cast onto the models and pretty easy to pick out with a small brush

I also continued my run of doing 4-spot faces on these guys too - some of them had pretty small faces under those helmets but at wargaming distances they look OK IMO. 

 

From the back the striped, blacklined effect on the jerkins comes out really clearly

You'll note that these two sets of guys in red do have slightly different coloured reins - again allowing me to differentiate these as separate units or drop them itno different commands in an ADLG army if needed, or to keep them together as well.

 

Some of the spears were bent, and some others seemed to bend out of shape quite markedly after I undercoated them - which was weird - but they do seem mostly to have bent back into shape with just a little manual encouragement with no need to heat them in hot water or anything. They can't be made dead straight, but they are break-proof so swings and roundabouts there I guess. 

I did try and drill out one chaps hand to take a plastic broom bristle spear, but much to my surprise I found it really tricky to do. 

This was because the arm of the figure wobbled alarmingly (being plastic rather than metal of course) when I was drilling into the hand/gauntlet, meaning I ended up with a pretty ragged and messy hole even when using my Dremel with the uppy-downey lever thing contraption. As a result I basically gave up on drilling any more and left them as they were.  

 

One thing I did find was that the riders sat a little "wide" on the horses, and being plastic its simply not possible to squeeze the riders legs together to grip their mounts more tightly as you can do with metal figures. 

That means you are relying entirely on the glue to make a good bond between buttock and saddle, as the riders legs are permanently set a bit wider than the horse's backs. 

All in all I'm very pleased by how they have come out, and now I'm frantically flicking through army list books to find an excuse to use them!

Achilles & The Myrmidions in 15mm

 Having been reasonably succesful with a Mycenean army at Warfare in 2022, and then getting my hands on a proper Trojan Horse at the Alicante event some months later I am now of course tempted to wheel out the Myceneans again at a future event.

At Warfare one of the star units in my army was Achilles and his Myrmidions - but to be honest the figures were not especially "Myrmidion", being mostly these old-style Museum swordsmen sculpts with fairly generic shields.

 So, when Museum came out with a range of Myrmidions, and also Trojan hero figures in their new Z-Sculpts that suddenly seemed like a must-have addition to give me two new units of spiffy Myrmidions with very obvious Included Generals (aka Achilles) leading one of them. 

And here they are - most of the Heroes of the Trojan Age are clustered on the stand on the left, with standard Myrmidions on the right. 

The Heroes are slightly, but noticably bigger than the normal rather slim Myrmidions, and all have unique poses and equipment.

This front-on shot shows the size difference clearly. 

They are nice figures, but I did find them harder to paint than I had hoped as the detail on the figures is really very shallow, which makes spotting which areas to paint, and painting with washes and speedpaints much harder than it really should be.  

There are also some hard to understand elements in the design, especially the "woolly hats" which seem to have horns projecting though them - which to my mind would surely sit better on a metal helmet? 

Perhaps though I've not done enough research and the Myceneans actually had tea cosies over their helmets? 

Here they are from the rear - you can see where I have had to use layered shading to get some texture into the clothing as the figures didn't really do much for the Holy White ArmyPainter speedpaint on their own. 

So, all in all I think they have come out OK - but perhaps not as well as I initially hoped, partly as the detail on the figures isn't as deep as I would ideally have liked, and partly as I found that lack of detail frustrating and as such maybe didn't try as hard as I needed to to adopt the right painting approach for these guys. 

Having painted up a fair few of the Museum Z Sculpts in the last few years I am actually starting to look more critically at them in general, as my experience with these figures is starting to feel like a common thread across all of the others I've painted before now as well. 

Museums Z Ranges look great in the renders, they are nice poses, there's a whole lot to like about them, the price is good, the metal they use has a great pewter-like good quality too - but with so many of us increasingly relying on washes, Contrast and Speed paints to paint our figures, deeper slightly exaggerated details such as those seen on Xyston, or Forged in Battles' ranges are much easier to paint. Their deep details really do come up a treat - whereas some of the details on these Museum Z Sculpts almost seems to disappear even with just an undercoat. 

If only the raised details and undercuts on the figures could just somehow be (I guess digitally?) "dialled up" a little, and perhaps some of the spears thickened too then the Z Range would be as good after people like me have finished painting them as they look in the 3D renders on the Museum site ! 

Indian Chariots from Museum's Z-range

 Museum's annual January sale is always a good opportunity to buy something I don't really need, and this year was no exception. 

Amongst the bits and bobs to round out existing armies I picked up 2 more Indian Chariots - this time from their new Z range to go with the original sculpts of the 2 I had somehow acquired through complete accident in previous years. 

And here are both of the chariots together - all done in contract paints (of course) for the bright colours and also giving great texture for the crew's skin as well.  

I sort of got mixed up with which crewmember went with which chariot, and I'm not entirely sure where the guy with the palm leaf is supposed to go - but as he is so much fun I squeezed him on the base anyway!

The commanders chariot head on - I used ArmyPainter Speedpaint Holy White for the pale grey horses here 

The ringed effect on the brolly is just an artefact of Contrast Paints - not painted by me at all. The color is Magos Purple.

I now have all 4 Heavy Chariots for an ADLG Indian army - whether I will ever use them in anger is another question entirely!