Showing posts with label Fanatic Paints. Show all posts
Showing posts with label Fanatic Paints. Show all posts

13 Nov 2026

28mm Franks - the second tranche

 Last year (I think?) I picked up a set of Wargames Atlantic's "Goth Warriors" (bonus points if you can tell the difference between them and the Generic Dark Age Dudes box set!)  in 28mm, to use as Frankish Foederati mercenaries in a Very Late Roman army I've had for quite some time.  

The reasons for picking up these "Franks" were twofold - first so that I could stop using Old Glory Scottish Vikings as "Foederati" foot, but more importantly because I had finally worked out how to do two-tone horizontal stripes on tunics, which meant I could make some almost "onion round the neck" French Franks to brighten up my admittedly rather almost-in-the-dark-ages Roman army.   

I'd done one test base earlier this year, and now, as a big change from the legions of 15mm horsemen who had been clogging up my painting table recently, it was time to go full stripey and get some football-kit-wearing Franks onto the painting table. 

Because the figures have been assembled in reasonably dynamic poses, waving axes around and the like, I mounted them on 60x40 bases in sevens rather than eights, with 4 in the front rank, and 3 in the back. This did allow me to usesome "filler" figures to pad out the rear ranks without being seen, as the striped guys really grab the viewers attention. 

And, finally, here are the two more fully-finished bases of "Franks".

These guys are mostly the WA Goths set, with a few stragglers from a Warlord Resin Dacian Skirmishers blister - a bargain bin show purchase - making up the rear ranks. 

The shields are a mix of Victrix Gallic round shields (those with the metal spine down the middle) which I had in the bits box, along with some LBMS transfers for them, and the rest are waterslide transfers from Battle Flag, aka wargametransfers.com's Viking range.

The Battle Flag transfers are a smidge too big for the WA shields, so I've trimmed them down slightly to fit before applying them. 

The WA shields are also somewhat convex, which makes applying waterslide transfers a real PITA - the solution I've adopted is planty of MicroSol/MicroSet transfer-softener, and sometimes also slicing the transfers in a dark-ish part of the design so the transfer can overlap a little as it "shrinks"/"curls" around the convex face of the shield without it being too obvious. 

From the back you can see the un-stripey Warlord figures more prominently. 

The trick with the stripes is embarassingly easy - a fat darker stripe with a narrower lighter stripe within it. 

Blending the edges of the transfers into the edges of the actual shields was a bit tricker than I hoped with these transfers, as the colour blocks all seemed to have a lot of "texture", and the transfers were also a little translucent too - a difficult combination to match even with a range of paints and a wet pallette to use. 

But, at normal distances they seem to have come out OK - and a layer of gloss varnish  on the shields prior to doing the matt varnish coat also works wonders.

Here they are with the other base I did earlier. I have been looking for some more of the Gripping Beast plastic Late Roman shields in my bits box, as I still have a good number of really nice LBMS "Late Roman Chi-Rho" oval shield transfers, and I like the way they make this unit look like it's sort-of half integrated in a Roman army - but so far no luck in finding any more spares! 

One issue I did have with these figures was that they tended to get a little boisterous during the painting process, and getting the little b-ggers to stand still whilst I painted the double-lines on their tunics was rather challenging at times, as you can see here...


Never mind the overalll AI stuff, it is still quite clever how their puddle bases spin around and move a little under their feet as they are jumping! 

 

21 Oct 2026

Alan Cavalry

 The FiB Steppe Warrior fest continues with these Alan cavalry, who have shields and short(er) spears.


I believe they are Alan Cavalry, reference number WE-SA05 in the FiB Catalogue.  


There are no shield transfers for this lot, so I had to do some old-school "painting of designs" - which is also what happened with many of the Byzantine cavalry I painted last year. 



The patterns are mostly based on Alan symbols - it's not just random you know! 



They've ended up as being quite jolly - originally I was considering just plain shields, but the combination of the high opacity of the newer Fanatic paints and a new brush seems to have allowed me to do some reasonably simple symbols and make them look better by adding lines and circles of dots around and across the shields - so they may get more game time than I was originally thinking!  


30 Sept 2026

Sarmatian Medium Cavalry Bowmen

 The FiB Sarmatian-fest continues with some "Medium" cavalry - aka "unarmoured", "standard", "generic" or whatever. I'm not even sure which packs they came from, but anyways, they are mostly armed with short spears held in their hands, no shield, and a bowcase and bow on their hips. 


I'm not sure if this is a muted pallette or a bold one- there's quite a lot of GW Contrast Militarum Green in there, but also some pale blue "Frostheart" and the odd bit of normal painting going on as well. 

I have - like the Skythian Nobles - also added some "spots within spots" to make them look a little more, erm Skythian. 

Here you can start to see the bowcases - I have a good number of unarmoured cavalry firing bows, and two of them have made it into this set of 4 bases, but I prefer to use them on Light Horse bases if I can, so I didn't quite have enough to include one shooter per base in this lot.


Unusually I have gone for a pretty random mix of hair colours too - I always suspect there is a "right" mix of colouurs to aim for given the origins of troops like these, but that is probably "mostly black", which is a tad dull - and with many of these castings having bowl-style haircuts it can soon look like  The Beatles are riding into battle - which is not a great look TBH. 


They are now ready to go and confuse my enemies who will no doubt think they are armed with "light spear" instead of bows! 



6 Jul 2026

Xyston Takabara

 Earlier this summer I accidentally ordered some Persian Takabara infantry from Xyston, as part of a valiant effort to get value for money out of the postage costs of buying one piece of 15mm artillery from them (which you may have already seen ...).

This first photo shows their backs, as that is where most of the arty stuff is visible, as I did them with a base coat of GW Contrast, and then added double-spots with Army Painter fanatic colours - which didn't run into the Contrasts, much to my relief.



These are great little figures, and even better with LBMS transfers on their shields - although with 4 different sizes and shapes of shields and transfers, each of which is only slightly different, matching them up is a little tricky! 


Because the transfers might not always go on the right shields, its really important with these I found to blend in the edges of the transfers with paint - which I have done with all of the ones here. 

It proved a perfect excuse to get my Wet Pallette out again to do the blending, and a good self-justification for buying some of the ArmyPainter 6-part "triads" as well to blend an exact match for the LBMS transfers too. 


These guys are especially good IMO, with a base of Mantis Warrior Green with Pure Red and Daemonic Yellow dots. 


You may notice that a couple of the archers here are wearing Early Persian ceremonial dress - and are in fact Museum Z-sculpt figures, as it turned out I needed 12 archers to give each base 2 "support" shooters as well as the 4 spear/axe/sword armed troopers.

Anyways, I am really pleased with how they came out - there are some more photos of them in the Photo Gallery on this site. 

11 May 2026

Victrix Spanish - 28mm Roman-era warriors

The Republican Roman army I built a couple of years ago using mostly Foundry legionaries has always been whingeing away in its Really Useful Box asking me to get it some more interesting and colourful subject, mercenary and allied troops.. 

..and, amazingly, a few sprues of Victrix Spanish warriors somehow found their way into my eBay basket and voila, the Romans have some Iberian mercenaries!


In my continuing attempts to try as many painting styles as possible, I initially painted these with a matt white undercoat, and then applied Army Painter Holy White to the, erm, "white" ones, GW Aggaros Dunes to the "yellow" ones and did the "red" ones in Army Painter Blood Red.


I then painted over most of these "contrast" base coats with block colours, leaving the folds in the tunics as the lowlights - the contrast all bleed slightly into the top layers (not as much as the ArmyPainter first generation of these paints did though!) which also helps soften the distinction between shading and block colours.


The "experiment" bit of this process came as I opted to use AK paint pens to do most of the block colouring - the "white" ones using AK RCM034 Flat White, the "yellow" ones using AK RCM012 Wood Base and the "red" ones with AK RCM003 Signal Red. 


The pens have a "felt tip" nib that is fairly broad even though it comes to a point, so they actually worked quite well on these figures as the nib is way too big to go into the creases of the tunics, leaving the darker underlights (?) pretty much intact whilst skimming over the topmost layers.


The white in particular needed a few coats and run-overs with the pen to get decent coverage, with the yellow having more opacity but still needing a couple of goes. 


Annoyingly I managed somehow to break one of the spears, and also one of the swords when I was taking them outside to spray varnish (both in the back row). These have - as is usual with Victrix - very thin spears, and there will be casualties, such that I'm not even sure I will repair these two as it's very hard to see unless I point it out!  


The pens are sadly not sharp enough to do the patterns on the tunics, so those had to be done with a regular brush and paint - I managed to do the "darker narrow inner, lighter wider outer" type of stripes on some of the tunics, and got two narrow stripes on others.


They (of course) have LBMS transfers, which I found fitted really well for these figures. I painted the edges of the shields with ArmyPainter Enchanted Steel and/or Fanatic Bronze before applying the transfers, with the Enchanted Steel in particular being very flow-ey (..?) so it just runs nicely into the edges of the embossed edges and bosses to save on the need for all that much blacklining and infilling later on after the transfers are on. 


You can just about see a bit of proper blacklining on some of these shields, but as I've said before, these  transfers seem to fit absolutely perfectly on this set.




I now have 3 bases of swordsmen/javelineers to fight alongside my Roman Legions. 



Frankly I'm astonished how good these look - even if I say so myself! 



There are also a couple of javelin armed skirmishers, as the sprues I had seemed to make up 20 figures somehow - seems like an odd number, but hey! 
 

No LBMS transfers for these shields on the sheet though ! 


Here they are next to my Foundry "Classic Legionaries" 


They are a bit taller, but nothing to worry about at all on the tabletop. 


And here is a Nauk Nauk animation of the guys in action !


The Madaxeman Podcast

The Madaxeman Podcast
Listen now on Podbean

Past Updates

Popular Posts