Charlemagne - The Emperor has Arrived!

 A Carolingian army has been sat on the to-do shelf for a couple of years now -  I bought it partly to see what Baueda figures looked like in the metal, and partly as I had already bought 1 dozen of their mounted Carolingian archers with a vague thought of adding them to some generic Gothic cavalry and cobbling together a morph army at some stage. 

Digging into it a bit more I had soon realised that the whole army needed to be, well, "Carolingian-looking" though, hence the purchase. 

Over the past year I'd added some more Forged in Battle cavalry through a few eBay purchases, and that had both bulked out the army and made it harder to begin to paint as well.

However after a road trip to Aachen, seat of the Carolingans and interment place of Charlemagne himself I became inspired enough to pick up the spray can, and to give them a quick and colourful (mostly Contrast) paint job to get them table-ready, in part as I had to paint something to get away from rigging more little ships, and in part as Aachen Cathedral is so fabulous that I convinced myself I didn't need to paint the soldiers all in Middle Ages style duns and tans, as this dude had some style, and also some money to splash around. 

The end result is a fairly over-enthusiastic and colourful army with all of the possible options;

These are Baueda - their horsemen don't mix with FiB's very well as the Baueda ones have very narrow horses and V-shaped riders legs to fit on them, and the FiB ones are chubby beasts with suitably arch-shaped riders legs - so the two manufacturers provide (mostly) separate parts of the army

This is the same unit from the back. There seemed a lot of red and blue in some of the contemporary depictions of the Carolingain military I found, so I felt comfortable giving these "better quality" guys a bold uniform red cloak look. 

FiB horsemen in leather armour, as Medium cavalry. Of course, LBMS shields.

The Horse Archers - a Baueda special, painted ages ago and now rebased to the same scheme as the rest of the army

Armoured cavalry from FiB (maybe a couple of Baueda boys sneaking in there too)

Baueda infantry, apart from the unit in the centre front, who are FiB with the more distinctive Carolingian helmets. Because the Baueda chaps are fairly non-specific they may appear as Saxons or something at some point in future too.

From the back the Contrast Paint style really shows up well. 

FiB Light Horse. I only needed 2 bases, so mixed in a few of the other riders with the Medium cavalry

Javelin skirmishers. Fairly weedy dudes, not sure how long their ankles will survive in-game handling TBH

And, the whole set - 38 bases including Generals. I suspect some Vikings will also freelance as mercenaries at some point when they finally get on the table too.

There are even more photos in the 15mm photo gallery of these dudes. 

 

3D printed miniatures - the future has arrived (in the post..)

 So... first off I'm nowhere near even thinking about getting a 3D printer. I have far too many armies already, and I have no inclination to pick up what I suspect would be an entirely new additional geeky OCD-generating hobby to complement those I already have! 

Having said that, I have bought a handful of printed 10mm vehicles in the past, some of decidedly "mixed" quality and I have also been watching with interest various discussions online (and even in our own Madaxeman Podcast) about when 3D printing will, seemingly inevitably, start to impact the traditional world of metal (and plastic) production casting of wargames figures.

It was with that investigative mindset that I recently bought a set of 3D printed figures from a seller on Etsy (Small Scale Prints), from the Hannibal vs Rome range designed by Warprinter from Germany. paying a rather remarkable £12 + P&P for some 60 figures.

The range was originally designed for printing at 10mm scale, but the helpful chap at Small Scale Prints was happy to scale them up and print them for me at 15mm size

And these are the models that arrived in the post - printed on strips of 5 in a grey plasticy and rigid material

.  

I'd ordered a mix of the Etruscans and Samnites, planning to use them to bulk out some of my existing Early Roman armies into other Latin states of that era - armies that I was unlikely to use all that often, but which the completist in me fancied trying anyway a couple of times. 

For that sort of thing I wasn't ever going to spend a fortune on, say, Mirliton minis just to leave them in a drawer after a couple of outings, but the idea of having an excuse to take a look at what 3D printing could offer at the moment, and picking up a load of simple to paint minis to bang out quickly was exactly what I was needed to prompt me to buy on in there.    

I went for a white (Halfords spray) undercoat, which took really well - I didn't clean the minis before spraying at all, and then started blocking in the flesh areas, and also putting a black undercoat on the  spots which would end up as metallic.

The material (resin?) used really impressed me - it's light, but very robust, and has just a little flex in it without actually being bendy, and it seems to take paint really well as well.    

The "quick and easy" plan meant that my limited stock of Contrast Paints got the majority vote, so most of the chaps ended up in pastel colours from the GW range. 

The exceptions are the "grey" ones (2nd from right in the row nearest the camera and a fe win the 2nd row too) who are done in a Warlord Games Speedpaint called Holy White, that I quite like the effect of.

From the front they still look pretty chubby and cartoonish at this stage - sort of like Lamming figures of old, but scaled down to 15mm from 25's.

Adding a few more colours - and the inevitable shield transfers of course - has however really made a big difference, and they are really starting to develop some character at this stage. 

The close-up shows a little more shading is still needed

Here they are next to some 15mm Hoplites from Essex and Magister Militum, which I had swapped out the spears from and replaced by broom bristles. The contrast makes the 3D printed spears look huge (and to be fair they are over-sized), but the original Essex metal spears woudl have been much closer visually to the 3D ones. 

From the back they are still "different", but not as much as they looked when they started off. 

 

Here's the almost-finished guys next to some Old Glory Romans - their most likely allies and opponets on the tabletop. I still needed to do a few more think washes on the feathers and faces at this stage

And ta-dah - the finished article, fully based and painted up ready to go to war in ancient Italy! 

Yes, they do still have an air of “Lego” men about them for sure, but I think in some ways that also makes them kinda cute and gives them a real likability factor too (reminscent in some ways of the Lamming 25mm range from back in the day). Stood next to Old Glory 15mm Romans, and at wargaming distances they don't - to me - look all that out of place at all. 

Maybe the best summary is to say that "They are what they are" - simply-designed, low cost figures sculpted for 10mm and scaled up to 15mm, and on that basis I think they succeed admirably. 

I'm really happy with how they have come out, however almost the more interesting thing for me is that having these guys in-hand, I've begun to see just how easy it is soon going to be for gamers - even using fairly basic 3D design skills - to begin to start playing around in 3D, mixing and matching even simplistic "lego-style" body parts to suddenly cook up entirely new, bespoke, limited run armies and figures to add to their collections. 

And, I wil stress again, these guys are not trying or claiming to be anatomically accurate works of art - they are just cheap and cheerful "get em on the table" figures. Other 3D printed options out there, such as the March to Hell armies from 3D Breed , and the 28mm Caballero figures too (of which I have a few in the painting queue as well bought from Fenland Miniatures..) look to be a whole different kettle of fish 

Interesting times indeed!

Last week I started doing a little ship ..

 ..and being very, very careful with my typing as well.

Yes, the Black Seas starter set that arrived the Christmas before last (I hope it wasn't before that!) has finally started, with a test build and paint of a Brig.

First impressions are that it's very easy to make (so far..), very light, and is actually TINY! 

I'd been toying with various ideas involving buying foam storage and 9L RUB boxes, but honestly I'm not sure this will merit such investment and space as I can't see even a box full of a few of them justifying the excess foam. Instead I've put a layer of Magnabase on the bottom of the hull so they can be kept on a ferrous surface, as I can't see them shaking off anytime soon.

This model was sprayed white as part of a mass-undercoat session last week, and then done in Contrast Paints, which I thought might do a good job of picking out the woodwork details. 

The paints used were Nazdreg Yellow on the deck, Skeleton Horde on the hull and (I think) Gore-Grunta Fur on the mast. 

With the benefit of hindsight I'll probably swap the Skeleton Horde and Nazdreg Yellow over and do the ships sidewalls with the yellow colour. 

There is no "right" way to do these, but a few skulks around the internet seemed to suggest painting some of the spars black - and it does make the model pop a little more than leaving them natural (or unnatrural given the paint used) wood.

This is where it's ended up - very quick and easy. 

Next up, making more of them... and then ... Rigging! 

Museum Z-range Camel Baggage Guards

As a mark of how much my pace of painting has slowed, here's a couple of bases (or packs) of Museum Z-range camel archers I must have bought in the Museum sale back in January! 

These guys are the type who appear as baggage guards for a number of Hellenistic and other Roman-era desert dwelling armies, which I picked up as the Essex camels I had are a little uninspiring (to say the least). 

These were undercoated in white and painted mostly in GW Contrast paints with some other colours added for the details.

This shot shows a Light Camel unit using Essex figures alongside the Museum camels. 

The Essex camels are a little smaller, but viewed from wargaming distances and angles the difference is barely noticable 

This shot shows the "old" Museum double-crewed Biblical Bedouin Giant Camel - still a monster casting, towering over the new Museum figures

 

And here are all three in a procession! 

This pair of Mediocre Medium and Light Camels will be guarding the baggage and frightening enemy Light Horse on a table near you in the near future !

Refurbished Medievals in 15mm

 Another project to suddenly stagger to fruition in the last week has been a load of stripped and repainted Mirliton 15mm Medievals - lovely figures that my previous paint job really didn't do justsice to.

This time around they have all been done with white undercoat (Halfords matt white car undercoat) and the main colours have been added with GW Contrast paints for a bit more "ping".

I've also done printed shields - some stuck onto the Mirliton shields, and some just made out of cardboard and cut to shape. These are the results:

All of these designs were found on Pinterest - the "fish" one on the right in particular is way too detailed for me (or I imagine anyone..) to paint in 15mm, however the other two also come out really strongly too. 

The ones on the left are Mirliton shields, with designs just printed on our home printer, glued on with PVA, trimmed with a very sharp scalpel (new blade time!) and then gloss varnished after painting in the edges.  The ones on the right are glued onto cardboard and cut to shape.

These are two bases of Polearm men - the printed out designs are probably a bit too large for the shields here I think in retrospect,.

The pavises on the left here are a mix of pictures of real pavises in museums, and re-enactors designs I found on Pinterest.

I still have a few more to do, but this is starting to creep towards enough mixed units to field a  Medieval Scandinavian army !

Chariot Madness

 I'm not even sure how I ended up with these 4 (FOUR???!!) Essex Scythed Chariots - it's a figure/model that many people will own and recognise, and I have had these sat around undercoated yet unpainted for years as I have a couple of more robust chariots from an unknown manufacturer that I use for Scythed Chariots in my Hellenistic armies anyway.

But, with the sun almost shining and a need to make space in the Bisley drawers for some new armies the lead pile has been taking some paints to see if I can turn unpainted projects into eBay fodder - and these are the next in line. 

This guy was painted mostly pale blue, using Talassar Blue Contrast as a final "wash" coat. The scale leather armour is Skeleton Horde over shite undercoat, as are the horses

This one was a base of yellow, with Iyanden Yellow Contrast as a wash  

I'm almost tempted to keep them now - or perhaps I'll do some "wallpaper" for the final two and keep them instead! 

Museum Z-Sculpt Persian Sparabara and Immortals

 With the Cyrus' Mobile Tower having languished in the drawer since before Xmas last year, and with plenty of cavalry and ancilliary troops all done, finally the Early Persian army gets the core of it's troops - the Immortals and Sparabara:

For these guys I have managed to fit between 12-14 figures on each 40x40mm ADLG infantry unit base, leaving a gap at the front as well so the rear ranks are really crowded with archers 

I also followed up on my numerous "wallpaper" experiments with wallpapering the pavises of the Sparabara to make them more colourful and personalised - as usual just ssearching for "Persian Patterns" on Pinterest and Google 

My theory was that no-one really knows what they looked like, so why wouldn't they go personalised on the designs?

From the rear you can really see how they have been crammed in, using a variety of the Museum poses and equipment sets

There are cuirasses, petruges, no armour at all, helmets, hoods, all sorts really... 

I needed two bases to act as Immortals, and dithered about with how to represent them, finally chooing a unique, pointed-top spara and a common, 'posh-looking' design - after I stumbled on the design online.

I also added the standard bearers and musicians to the bases to make them even more obvious from the back as well

Each of the units has someone poking through the wall of pavises - these have a kneeling archer and a officer bloke with a small axe checking that the coast is clear

From the back you can see the real mix of Contrast and normal paints I used, as well as some of the very basic "spots and lines" patterns - with the figures this densely packed it is all about the mass effect, even though many of the patterns are not ones that would stand up to independent scrutiny! 

 

The cuirass-wearers were done with white undercoat, a wash with Skeleton Contrast, then the blocks of armour and petruges painted in Ivory.  

It's all about the figure density

The second tranche of 'normal' Sparabara

Another spotty mass of humanity. 

Hopefully this is the view I will see most often! 

Here are some of them with Cyrus' 10mm Pendraken Siege Tower 

And all in a row

And, all the colours from the back!